Dual-screen positioning with an integrated device tray
Need More Screen Space Without Losing More of Your Desk?
The Artiss Monitor Arm with Laptop/Tablet Tray lifts your
screens and device off the desktop while giving you the flexibility to
reposition them around the way you work.
Support up to two monitors measuring up to 32 inches,
while the included device tray provides a dedicated raised position for a
compatible laptop, tablet or keyboard.
With adjustable height, extendable arms, tilt, swivel, rotation and two
mounting options, you can create a cleaner multi-screen setup without
permanently fixing your displays in one position.
Lift your screens off the desk and position them around you.
The Artiss mounting system helps free valuable desktop space while giving
you considerably more control over monitor height, distance and viewing angle.
Build a More Flexible Multi-Screen Workspace
2×
Dual Monitor Support
Mount compatible screens up to 32 inches and reposition them
independently around your preferred workstation layout.
TRAY
Integrated Device Tray
Use the included tray to support a compatible laptop, tablet or
keyboard without occupying additional desktop space.
FLEX
Flexible Screen Positioning
Adjust height, extension, rotation, swivel and tilt to position each
screen around your work and viewing preferences.
SPACE
Reclaim Desktop Space
Move bulky monitor stands off the work surface and create more room
for your keyboard, mouse, documents and everyday work.
Why Put Your Screens on Monitor Arms?
Standard monitor stands determine where the screen sits based largely on
the design of the stand.
A monitor arm gives you much more control.
You can raise the screen, move it closer or further away, rotate it,
change the viewing angle and reposition it when your work changes.
At the same time, removing large monitor bases from the desktop can make
the workstation feel cleaner and give you considerably more usable surface area.
Adjust Your Screens Around the Way You Work
180°
Rotation
Rotate the arms through approximately 180 degrees to help position
screens around different desk layouts.
90°
Swivel
Swivel each compatible display through approximately 90 degrees to
refine its horizontal viewing position.
45°
Tilt
Tilt the screen through approximately 45 degrees to help create a more
comfortable viewing angle.
P / L
Portrait or Landscape
Compatible displays can be positioned in portrait or landscape
orientation depending on your preferred workflow.
Raise Your Screens Up to Approximately 40cm
Screen height is one of the most useful adjustments in a workstation.
The Artiss monitor arm provides up to approximately
40cm of mounting height, allowing you to position your
screens more appropriately around your eye level and sitting position.
Once positioned, you can still combine height adjustment with tilt and
arm extension to refine your viewing setup further.
Bring Screens Closer or Push Them Back
Each arm can extend up to approximately
38cm.
This allows you to change viewing distance without physically moving the
desk or shifting the monitor stand across the work surface.
When additional desk space is needed, the arms can also retract to bring
the screens closer to the rear of the workstation.
Give Your Laptop or Tablet Its Own Raised Position
The included device tray adds another useful working surface to the setup.
It can support a compatible laptop up to approximately
15.6 inches and up to 4kg, as well as
suitable tablets or other compatible devices.
Raising a laptop screen can be particularly useful when it is being used
alongside external monitors as part of a multi-screen workstation.
i
If a laptop is raised for prolonged work,
pair it with an external keyboard and mouse so the screen and input
devices can be positioned independently.
Create a Multi-Screen Layout Around Your Workflow
Dual Monitors
Laptop + Screens
Portrait Displays
Hybrid Workstations
Position your primary screen directly in front of you, then arrange
secondary displays around it based on how often you use them.
The independent arm movement makes it easy to refine the arrangement when
your tasks or equipment change.
Free Up More of the Desk for Actual Work
Monitor bases can occupy a surprisingly large amount of usable desktop area.
Mounting the screens from the rear of the desk moves much of that hardware
off the work surface and opens up space beneath the displays.
That can create more room for documents, notebooks, peripherals and other
equipment while keeping the overall workstation feeling less crowded.
Built-In Cable Management Keeps the Setup Cleaner
Integrated cable hooks help guide monitor and device cables along the arm
structure rather than allowing them to hang loosely across the desk.
Keeping cables closer to the monitor arms can make a multi-screen
workstation look cleaner and reduce clutter around the main work area.
i
Leave enough cable slack for movement.
Monitor and device cables should be able to follow the arms through
their normal adjustment range without being pulled tight.
Keep the Adjustment Tools with the Monitor Arm
An integrated Allen-key holder gives the included adjustment tools a
dedicated place to stay after installation.
That means the tools remain close at hand if you want to tighten,
reposition or fine-tune the mounting system later.
Detachable VESA Plates Make Screen Installation Easier
The monitor arms support the two common mounting patterns:
VESA 75 × 75mm and 100 × 100mm.
Detachable VESA plates allow the plate to be attached to the monitor first
before the screen is connected back to the arm.
This can make mounting and repositioning compatible displays significantly easier.
i
Check your monitor before ordering.
Each screen should be no larger than 32 inches, weigh no more than 9kg
and support VESA 75 × 75mm or 100 × 100mm mounting.
Supports Up to 9kg Per Monitor Arm
Each monitor arm supports a compatible screen weighing up to
9kg.
This gives the mount useful flexibility across a wide range of common
office monitors while maintaining independent positioning for each display.
Always check the actual weight of the screen itself rather than relying on
screen size alone.
Two Ways to Mount It to Your Desk
CLAMP
C-Clamp Installation
Secure the mounting system around a compatible desk edge without
requiring a dedicated mounting hole through the desktop.
HOLE
Grommet Installation
Use a suitable existing grommet or mounting hole for a clean
through-desk installation.
Both options give you flexibility when integrating the monitor mount into
different workstation designs.
Steel Construction for a Stable Multi-Screen Setup
The monitor arms use
steel construction to provide a solid supporting
structure for compatible displays.
The black finish keeps the overall design clean and easy to pair with
common office monitors, laptops, standing desks and workstation accessories.
Set Your Screens Up Around the Work You Do Most
1
Position Your Primary Screen
Place the display you use most directly in front of your normal
working position.
2
Arrange Secondary Displays
Position your second monitor and device tray according to how often
you need to view or interact with them.
3
Fine-Tune Height & Distance
Adjust the arms until the screens can be viewed comfortably without
repeatedly leaning forwards or turning unnecessarily.
A Flexible Addition to Modern Workstations
Office Work
Home Offices
Multi-Screen Work
Gaming Setups
It is particularly useful for anyone who wants multiple devices visible at
once while retaining the freedom to change screen height, angle and
distance as their work changes.
Good Screen Positioning Makes the Whole Workstation Easier to Use
Monitor arms give you more control over where your displays sit in
relation to your eyes and normal working position.
Position frequently used screens where they can be viewed comfortably,
and arrange secondary displays so they do not require unnecessary
reaching, leaning or prolonged head rotation.
Screen positioning works best alongside an appropriately adjusted chair,
desk, keyboard and mouse setup.
Product Details
Product Type
Dual monitor arm system with device tray
Maximum Screen Size
Up to 32 inches per compatible monitor
Monitor Capacity
Up to 9kg per arm
Maximum Laptop Size
Up to approximately 15.6 inches
Rotation
Approximately ±180°
Swivel
Approximately ±90°
Screen Orientation
Portrait or landscape
Maximum Height
Approximately 40cm
Maximum Arm Extension
Approximately 38cm per arm
VESA Compatibility
75 × 75mm and 100 × 100mm
Mounting Options
C-clamp or desk grommet
Monitor Arm Material
Steel
Device Tray Material
Plastic
Cable Management
Integrated cable hooks
Tool Storage
Integrated Allen-key holder
Assembly
Required; mounting hardware and instructions included
Best For
Users wanting flexible dual-monitor positioning, a raised laptop or
tablet setup and more usable desktop space
✓
1-Year Warranty
The Artiss Monitor Arm with Laptop/Tablet Tray is covered by a
one-year warranty. If a covered fault develops during
the warranty period, we'll work with you to arrange repair or
replacement in accordance with our warranty terms.
More Screens, More Flexibility and More Usable Desk Space
With support for two monitors up to 32 inches, an integrated laptop or
tablet tray, independent screen positioning, 38cm arm extension, dual
mounting options and built-in cable management, the Artiss Monitor Arm
system gives you the freedom to organise a multi-device workstation around
the way you actually work.
