Independent dual gas-spring monitor arms
Move Two Monitors Smoothly and Position Each One Where You Need It
The Brateck Dual Monitor Arm gives each of your screens
its own gas-spring-assisted arm, allowing you to independently adjust
height, distance, angle and orientation.
Designed for compatible 17–32 inch flat or curved monitors,
each arm supports screens weighing approximately
1–8kg and extends up to 46.6cm.
Add quick-release VESA mounting, built-in cable management and both clamp
and grommet installation options, and you have a flexible dual-screen
solution for work, gaming and multi-monitor setups.
Independent gas-spring movement means each screen can be positioned around its own role in your workflow.
Move one screen closer, raise the other, change their angles or rotate a
display vertically without having to reposition the entire monitor setup.
Flexible Control Over Two Screens
GAS
Gas-Spring Assisted Movement
Counterbalanced arms are designed to make compatible monitors easier
to move and reposition once correctly adjusted for screen weight.
DUAL
Independent Monitor Arms
Each monitor can be positioned separately instead of forcing both
screens into one fixed arrangement.
46.6CM
Generous Arm Extension
Extend each arm up to approximately 466mm to bring a screen closer or
push it back when you want more distance.
8KG
Up to 8kg Per Screen
Supports compatible flat or curved monitors weighing between
approximately 1kg and 8kg each.
Smooth Adjustment Without Constantly Loosening Mechanical Joints
The built-in gas-spring mechanism counterbalances the weight of each
compatible monitor.
Once the arm tension is set correctly for the installed screen, you can
reposition the monitor through its available movement range without
repeatedly undoing and retightening adjustment points.
This is particularly useful when you regularly change screen position
throughout the day or share a workstation with another person.
Arrange Two Screens Around the Way You Actually Work
Dual monitors do not always need to sit in a perfectly symmetrical
side-by-side arrangement.
Keep your primary display directly in front of you and angle a secondary
screen alongside it, or adjust both screens according to the applications
you use most often.
Dual Office Screens
Gaming Setups
Creative Work
Data & Analysis
Tilt, Swivel and Rotate Each Screen
±35° Tilt
±90° Swivel
±180° Screen Rotation
46.6cm Arm Extension
These adjustments give you useful control over screen direction and
orientation while the gas-spring arms handle the larger positional
movements.
Use Landscape and Portrait Screens Together
The VESA mounting heads allow compatible screens to rotate through
approximately ±180°.
Keep both displays in landscape for a broad horizontal workspace, or
rotate one vertically for documents, coding, messaging, web pages or
applications that benefit from additional vertical screen space.
Suitable for Compatible Flat and Curved Monitors
The Brateck arm is designed to support
compatible 17–32 inch flat and curved displays.
That makes it suitable for a broad range of office, gaming and creative
monitor setups, provided each screen remains within the specified weight
and VESA requirements.
Get Monitor Bases Off the Main Work Surface
Mounting both displays from a central desk-mounted structure removes the
need for two conventional monitor stands occupying space beneath the screens.
That leaves more of the desktop available for your keyboard, mouse,
documents and other everyday equipment.
Choose Clamp or Grommet Mounting
The Brateck Dual Monitor Arm includes both common desk-mounting options.
CLAMP
Desk Clamp
Suitable for compatible desktops approximately
10–80mm thick, allowing installation around the desk
edge without drilling a dedicated mounting hole.
GROMMET
Grommet Mount
A bolt-through mounting option is also included for compatible desks
with a suitable mounting hole or grommet position.
Quick-Release VESA Plates Simplify Monitor Installation
Each arm uses a detachable VESA mounting plate compatible with common
75 × 75mm and 100 × 100mm mounting patterns.
Attach the plate to the rear of the monitor first, then connect the screen
to the arm.
This makes installing or removing the monitors considerably easier than
trying to hold each screen in place while fitting all of the VESA screws.
Route Cables Along the Monitor Arms
Integrated cable-management channels help guide display and power cables
along the arms instead of leaving them hanging loosely behind your screens.
This helps maintain a cleaner dual-monitor setup while keeping cables
travelling with the arms as the screens are repositioned.
i
Leave sufficient cable slack.
After installation, move each arm through its intended extension,
swivel and rotation range to confirm that cables remain free and are not
pulled tight.
Set Up Each Screen Around Its Purpose
1
Install the Base
Use the clamp or grommet mounting method appropriate for your
compatible desktop.
2
Attach and Balance the Screens
Install the quick-release VESA plates and adjust the gas-spring
tension around each monitor's weight.
3
Fine-Tune the Layout
Position your primary and secondary displays according to how you
actually use them rather than simply making them symmetrical.
Check Both Screens Before Ordering
Each monitor should meet all three primary compatibility requirements:
suitable screen size, supported weight and compatible VESA mounting pattern.
17–32" Screen
1–8kg Per Screen
VESA 75 × 75mm
VESA 100 × 100mm
Product Details
Product
Brateck Dual Monitor Arm
Product Type
Dual independent gas-spring monitor arm
Recommended Screen Size
Approximately 17–32 inches
Curved Monitor Compatible
Yes, subject to size, weight and VESA compatibility
Weight Capacity
Approximately 1–8kg per screen
Maximum Arm Extension
Approximately 466mm per arm
Pole Height
Approximately 363mm
Tilt
Approximately +35° / -35°
Swivel
Approximately +90° / -90°
Screen Rotation
Approximately +180° / -180°
VESA Compatibility
75 × 75mm and 100 × 100mm
VESA Plates
Detachable / quick release
Mounting Options
Desk clamp or grommet mount
Clamp Desktop Thickness
Approximately 10–80mm
Grommet Desktop Thickness
Up to approximately 40mm
Material
Aluminium, steel and plastic
Colours
Matte Black or Metallic Grey
Overall Dimensions
Approximately 1050 × 128 × 785mm
Cable Management
Integrated
Best For
Dual-monitor users wanting smooth independent gas-spring adjustment
for flat or curved displays
✓
1-Year Warranty
The Brateck Dual Monitor Arm is covered by a
one-year warranty through No More Pain Ergonomics.
If a covered fault develops during the warranty period, we'll work
with you to arrange repair or replacement in accordance with our
warranty terms.
Smooth Independent Control for a Better Dual-Screen Setup
With gas-spring-assisted movement, independent 46.6cm arms, support for
two compatible 17–32 inch flat or curved monitors, adjustable tilt,
swivel and rotation, quick-release VESA plates, cable management and both
clamp and grommet mounting included, the Brateck Dual Monitor Arm gives
you flexible control over where each screen sits while freeing valuable
space across the desktop.
