Position Two Monitors Without Clamping Anything to Your Desk
The Artiss Dual Monitor Arm Stand gives two compatible screens their own adjustable arms while using a sturdy freestanding steel base.
Each arm extends up to approximately 43cm, supports a monitor weighing up to 9kg and provides independent height, tilt, swivel and rotation adjustment.
That makes it a practical dual-screen solution when you want flexible monitor positioning without drilling into the desktop or attaching a clamp to the desk edge.
Two independently adjustable monitors from one stable freestanding base.
Arrange your screens side-by-side, change their angles independently and reposition the complete setup without permanently mounting anything to your desk.
Build a Dual-Screen Setup Around the Way You Work
Two Adjustable Monitor Arms
Position two compatible screens independently rather than relying on their original fixed desktop stands.
9kg Capacity Per Arm
Each arm supports a compatible monitor weighing up to approximately 9kg.
Extendable Arms
Each monitor arm can extend up to approximately 43cm, giving you useful control over screen distance and positioning.
Freestanding Installation
The heavy-duty V-shaped base sits directly on the desktop with no drilling, clamping or grommet mounting required.
Give Each Screen Its Own Position
A dual-monitor workstation works best when each screen can be positioned around its actual role in your workflow.
Your primary display can sit directly in front of you while the secondary screen is angled alongside it for email, reference material, communications or additional applications.
Because the two arms move independently, you can adjust each monitor rather than forcing both displays into exactly the same position.
Adjust Screen Height Up to Approximately 46cm
The monitors can be positioned along the central support column to achieve a maximum height of approximately 46cm.
This gives you more control over where the displays sit relative to your chair, desk and normal viewing position.
Once the desired height is established, each arm can then be extended, rotated and angled independently.
Tilt, Swivel and Rotate Each Monitor
Use the available movement to fine-tune screen angle, create a comfortable dual-monitor arrangement or rotate one display vertically when the task benefits from additional vertical screen space.
Use Both Screens Horizontally or Mix Portrait and Landscape
The 360° rotary VESA plates allow compatible monitors to be rotated between landscape and portrait orientation.
You might keep your primary screen horizontal while turning a secondary display vertically for long documents, coding, communication tools or reference material.
Alternatively, keep both displays in landscape for a broad continuous dual-screen workspace.
No Clamp. No Drilling. No Permanent Desk Modification.
The Artiss stand uses a substantial V-shaped freestanding steel base.
This makes it particularly useful on desks where the rear edge cannot accommodate a conventional monitor-arm clamp, or when you simply want a setup that can be moved without removing mounting hardware.
Position the stand on a stable, level work surface and arrange the screens from there.
Detachable VESA Plates Make Monitor Installation Easier
Each arm uses a detachable mounting plate compatible with common 75 × 75mm and 100 × 100mm VESA patterns.
Attach the plate to the rear of the monitor first, then connect the screen to the stand.
This makes installation more manageable than trying to hold a monitor in position while fitting every mounting screw directly onto the arm.
Clean Up the Space Around Two Screens
Built-in cable loops help route display and power cables along the monitor arms instead of leaving them hanging loosely around the workstation.
The stand also incorporates an Allen key holder, keeping the adjustment tools close by if you need to make changes later.
Leave enough cable slack for movement. After setup, move both arms through their intended range and confirm that power and display cables do not become stretched or trapped.
Made for Dual-Screen Workstations
The independently adjustable arms make it useful for anyone who regularly works across two screens and wants more control over their relative position, orientation and viewing angle.
Check Both Monitors Before Ordering
The stand is designed for two compatible monitors up to approximately 32 inches, with a maximum weight of 9kg per arm.
Each screen must also use a compatible 75 × 75mm or 100 × 100mm VESA mounting pattern.
Check the dimensions, weight and VESA pattern of each monitor rather than relying on screen size alone.
Product Details
Two Screens, More Control, No Clamp Required
With independently adjustable arms, support for two compatible monitors up to 32 inches and 9kg each, 43cm of arm extension, height adjustment up to 46cm, tilt, swivel, portrait and landscape rotation, detachable VESA plates and a sturdy freestanding steel base, the Artiss Dual Monitor Arm Stand gives dual-screen workstations far more flexibility without permanently mounting anything to the desk.
