Tired of Power Boards and Cables Hanging Under Your Desk?
The Foldable Cable Management Tray – 2 Pack gives your cables, power boards and adapters a dedicated place underneath the desk, helping keep them off the floor and out of your main workspace.
Best of all, installation uses an adjustable clamp system, so there is no need to drill holes or screw a cable tray permanently into your desk.
Simply clamp each tray onto a suitable desk frame or mounting section, organise your cables inside the open wire basket and route them wherever they need to go.
Get the cables off the floor without drilling holes into your desk.
Two generous under-desk trays, adjustable clamp mounting and an open wire design make it easy to organise the cables behind a modern workstation.
A Simple Fix for One of the Messiest Parts of a Workstation
Clamp-On Installation
Secure the trays to a compatible desk frame without drilling holes or permanently screwing hardware into the desk.
Two Cable Trays Included
Spread cables across two separate trays or position them together to create a larger organised cable-management area.
Open Wire Design
Feed cables into and out of the tray at multiple points rather than forcing everything through one fixed opening.
Foldable Support Arms
The supporting arms lift into position for installation and form part of the practical clamp-mounted design.
Move the Cable Clutter Under the Desk, Not Across the Floor
Computer workstations can quickly accumulate monitor cables, laptop chargers, power boards, USB leads and power adapters.
Without somewhere to store them, those cables often end up hanging beneath the desktop or sitting in a pile on the floor.
The Foldable Cable Management Tray gives that equipment a dedicated location beneath the workstation while still keeping it accessible when you need to change or add a cable.
No Drilling. No Permanent Holes. No Complicated Installation.
The clamp system is one of the biggest advantages of this design.
Instead of drilling into the underside of the desktop, each tray attaches mechanically to a compatible section of the desk using its adjustable clamp.
That means you can add cable management without permanently modifying the desk, and the trays can be repositioned later if your workstation changes.
Adjustable Clamp Fits Suitable Sections from 20mm to 38mm
The mounting system is designed to attach to compatible desk frames or mounting sections measuring approximately 2cm to 3.8cm thick.
Rotate the clamp to adjust the opening, position it over the compatible mounting surface and tighten it securely into place.
Check your desk before ordering. Make sure there is a suitable 20–38mm mounting section and enough clear space underneath the desk for the tray and cables.
Two Trays Give You More Flexibility
The set includes two separate cable management trays.
You can use one for a power board and bulkier power adapters while the second manages monitor, computer and charging cables.
Alternatively, position both across the rear of a larger workstation to create more cable-management capacity beneath the desk.
Route Cables Wherever They Need to Go
The open wire mesh is particularly useful because your cables are not restricted to entering or exiting through one predetermined opening.
Leads can be threaded through the wire structure at different points along the tray, making it easier to route cables towards monitors, computers, chargers and power outlets.
This flexibility is especially useful when several devices are positioned across different parts of the desk.
A Cleaner Way to Organise Cables on a Height-Adjustable Desk
Cable management becomes particularly important on an electric standing desk.
When the desk moves, the cables connected to equipment on the desktop need to move with it without pulling tight, catching or dragging across the floor.
Keeping suitable power components and excess cable length organised beneath the moving desktop can make the overall setup much cleaner.
Always test the full height range after organising your cables. Make sure every lead has enough slack and nothing becomes stretched, pinched or caught as the desk moves.
Set Up in Three Simple Steps
Lift the Support Arm
Open the foldable supporting arm and prepare the clamp for your compatible desk frame or mounting section.
Clamp It into Position
Position the tray beneath the desk and tighten the adjustable clamp until the tray is securely mounted.
Organise Your Cables
Place suitable cables and power components inside the tray and route individual leads through the open wire structure.
Keep Cables Organised Without Hiding Them Somewhere Inaccessible
Good cable management should make a workstation cleaner without making future changes difficult.
The open basket design keeps cables contained while still allowing you to see and reach the components inside.
When you change a monitor, charger or computer accessory, you can access the tray directly rather than dismantling a closed cable-management system.
Useful for Almost Any Cable-Heavy Workstation
It is particularly useful when you have several powered devices around the desk and want to keep the cabling contained without making permanent changes to the workstation.
Keep More Equipment Off the Floor
Moving suitable power boards, adapters and excess cable length into an under-desk tray helps reduce the amount of equipment sitting directly beneath your feet.
This can make the area around the workstation easier to keep tidy and reduce loose cables crossing the floor around the desk.
A Small Upgrade That Can Make the Whole Desk Look Better
Cable management does not change how your computer works, but it can significantly change how finished the workstation looks and feels.
Keeping power boards and excess cable length beneath the desktop helps preserve a cleaner work surface and reduces the visual clutter around the desk.
For home offices in particular, it is a simple way to make a workstation feel much more intentional and organised.
Product Details
Get the Cable Mess Off the Floor Without Drilling into Your Desk
With two spacious open-wire trays, adjustable 20–38mm clamp mounting, foldable support arms and flexible cable routing, this cable management set gives power boards, adapters and loose cables a cleaner home beneath your workstation while keeping installation simple and reversible.