Proper Foot Support When Your Work Surface Sits Higher Than a Standard Desk
The High Rise Footrest is designed for seated work at laboratory benches, high counters, elevated desks and other work surfaces where a conventional office footrest simply does not provide enough height.
Its substantial powder-coated steel frame allows the foot platform to be positioned from approximately 10cm up to 36.5cm high, helping you support your feet while keeping your chair at the height required for the work surface.
The large 45.3 × 32cm non-slip platform can also be positioned flat or angled to suit your preferred foot position.
Designed specifically for high seated work.
Set your chair to the correct working height for the bench or desk, then bring the foot support up to meet your feet rather than lowering your chair simply to reach the floor.
Extra Height Where Ordinary Footrests Fall Short
Extra-High Adjustment
Raise the foot platform from approximately 10cm through to 36.5cm for workstations that require substantially higher seated positions.
Adjustable Platform Angle
Position the platform flat or on an angle to better suit your seated position and preferred foot placement.
Sturdy Steel Construction
Powder-coated steel construction creates a substantial support designed for regular professional and commercial use.
Generous Foot Platform
The approximately 45.3 × 32cm platform provides plenty of space to support both feet.
Keep the Chair at the Height Your Work Requires
At a laboratory bench or elevated desk, your chair often needs to be significantly higher than it would be at a standard office workstation.
Once the chair is raised, your feet may no longer reach the floor comfortably.
The High Rise Footrest provides a dedicated elevated surface beneath the feet, allowing the chair height to remain aligned with the work surface while giving your feet a stable place to rest.
Adjust the Height and Platform Angle to Suit the Setup
The foot platform can be repositioned through a broad height range and set either flat or angled.
This gives you control over both the height of the support and the angle beneath your feet, so the footrest can be configured around different chair heights and elevated work surfaces.
Once the preferred position is selected, the platform is secured using the side bolts. An Allen key is supplied for adjustment.
Large Non-Slip Foot Platform
The approximately 45.3cm wide × 32cm deep platform gives both feet a substantial support surface.
A non-slip covering helps provide secure contact beneath footwear during seated work.
Made for Elevated Seated Workstations
It is particularly useful where a drafting-height or high-lift chair is required and the user's feet need substantially more support height than a conventional office footrest can provide.
Designed and Made in Australia
The High Rise Footrest is designed and manufactured in Australia using powder-coated steel construction.
Its robust, straightforward design is well suited to professional environments where the footrest may be used regularly as part of a permanent workstation setup.
Setting Up Your Footrest
Start by setting your chair height around the desk, bench or work surface so you can work at an appropriate level.
Then raise the High Rise Footrest until both feet can rest securely on the platform. Fine-tune the platform angle to a position that feels comfortable beneath your feet.
Designed as a seated footrest. The platform is intended to support your feet while seated and should not be used as a step or standing platform.
Product Details
Foot Support Built for High Seated Work
With adjustment from approximately 10cm to 36.5cm, a large 45.3 × 32cm non-slip platform, flat or angled positioning and sturdy Australian-made steel construction, the High Rise Footrest provides the extra elevation needed to properly support your feet at benches, laboratory tables and other high work surfaces.